https://cybermaxtools.com/vehicle-recalls/terex/New NHTSA safety recalls for Terex vehicles.en-usMon, 17 Aug 2026 00:00:00 +0000https://cybermaxtools.com/vehicle-recalls/terex/c4000/26V534000Mon, 17 Aug 2026 00:00:00 +0000Ring Power Corporation (Ring Power) is recalling certain 2019-2026 Terex C4000, C5000, C6000, and General 65 digger derrick trucks. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate. Fix: Ring Power will inspect and replace the weldment plate as necessary, free of charge. Owner notification letters are expected to be mailed September 2026. Owners may contact Ring Power's customer servihttps://cybermaxtools.com/vehicle-recalls/terex/c4000/26V167000Thu, 19 Mar 2026 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2019-2026 General 65, General 80, General 95, C4000, C5000, and C6000 digger utility trucks equipped with pole guides. An insufficient weld on the plate weldment may crack, causing the retaining pin to separate. Fix: Owners will inspect the plate weldment for any cracks or abnormal welds. Dealers or owners will replace the plate weldment as necessary, free of charge. Owner notification letters were mailed June 2, https://cybermaxtools.com/vehicle-recalls/terex/hr40/26V006000Mon, 12 Jan 2026 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2025 TL-Series, LT-Series, LTM40, HR40, HR46, and SCM55 areal device vehicles. The control valve may have been assembled with an incorrect plug, causing the hydraulic equipment to overheat. Fix: Dealers will inspect and repair the control valve as necessary, free of charge. Owner notification letters were mailed January 23, 2026. Owners may contact Terex's customer service at 1-605-882-4000. https://cybermaxtools.com/vehicle-recalls/terex/aerial-devices/25V562000Fri, 29 Aug 2025 00:00:00 +0000Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle. Fix: Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs wihttps://cybermaxtools.com/vehicle-recalls/terex/tl-series/24V740000Thu, 03 Oct 2024 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2023-2024 TL80, TL80/112, TL100, and TM vehicles. The jib extension hydraulic cylinder rod may have a weak weld that can fail. Fix: Dealers will replace the jib extension cylinders, free of charge. Owner notification letters were mailed November 7, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's number fhttps://cybermaxtools.com/vehicle-recalls/terex/xt-pro/24V526000Thu, 11 Jul 2024 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2020-2024 XT Pro vehicles equipped with replacement basket brackets. The replacement basket brackets may not be compatible with the original basket retaining pins and cause the basket to unintentionally tilt. Fix: Dealers will replace the retaining pins, free of charge. Owner notification letters were mailed September 10, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for thishttps://cybermaxtools.com/vehicle-recalls/terex/tm-series/24V438000Thu, 13 Jun 2024 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2022-2023 TM vehicles. The master leveling controller may lose the ability to level the platform if power is lost while squeezing the enable trigger. Fix: Dealers will reprogram or replace the leveling controller, free of charge. Owner notification letters were mailed August 1, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's nhttps://cybermaxtools.com/vehicle-recalls/terex/xt-pro/24V042000Thu, 25 Jan 2024 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2023 Optima-TC55, Optima-HRX50, Optima-HRX55, and XT Pro vehicles. The boom rotation bearing bolts may not be tightened properly. Fix: Dealers will tighten the boom rotation bearing bolts, free of charge. Owner notification letters were mailed February 23, 2024. Owners may contact Terex customer service at 1-605-882-4000. Terex's numhttps://cybermaxtools.com/vehicle-recalls/terex/tl/23V396000Fri, 02 Jun 2023 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2021 TL48 trucks. The subframe which the aerial device bolts to may not be welded properly, which could result in weld failure, allowing the aerial device to fall. Fix: Dealers will inspect the subframe for cracks and remove and reweld the joint, as necessary, free of charge. Owner notification letters were mailed June 29, 2023. Owners may contact Terex customer servhttps://cybermaxtools.com/vehicle-recalls/terex/c4000/22V893000Fri, 02 Dec 2022 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, C5000, C6000, C7000, General, and Trans TL vehicles. A seam in the boom structure may have been improperly welded, causing the weld to crack. Fix: Dealers will replace or repair the boom, free of charge. Owner notification letters were mailed on February 8, 2023. Owners may contact Terex's customer service at 1-605-882-4000. Terex's number for thttps://cybermaxtools.com/vehicle-recalls/terex/c4000/22V888000Thu, 01 Dec 2022 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2022 C4000, Optima TC, and XT Pro outrigger vehicles. The outrigger cylinder may have been machined incorrectly, which can cause the lock valve cartridge seals to fail, allowing the cylinder to drift. Fix: Dealers will replace the cylinders, free of charge. All affected vehicles were inspected and remedied by December 22, 2022. Owners may contact Terex's customer service at 1-605-882-4000. Terex's numbehttps://cybermaxtools.com/vehicle-recalls/terex/tl/22V674000Thu, 08 Sep 2022 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2019-2022 TL80, TL80/112, and TL100 aerial devices. The welds for the platform leveling cylinder support bosses may crack, which can cause the cylinder support pin to fail and allow the platform to tip. Fix: Dealers will install reinforcement plates to the boom tip platform leveling cylinder bosses, and, all TL80/112 aerial devices will have the hydraulic storage latch for the elevator replaced, free of chttps://cybermaxtools.com/vehicle-recalls/terex/xt-pro/22V213000Thu, 31 Mar 2022 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2020-2022 XT Pro aerial devices. The pivot points may not have been lubricated during assembly, which can cause the pins to seize and break the pin retainers. Fix: Dealers will inspect and lubricate all pivot points, if necessary, free of charge. Owner notification letters are expected to be mailed on April 29, 2022. Owners may Terex's customer service at 1-605-https://cybermaxtools.com/vehicle-recalls/terex/tl80/20V696000Wed, 11 Nov 2020 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2019-2020 TL80 and TL100 aerial devices. The rotation bearing bolts may loosen during unit use, causing them to fail. Fix: Terex will notify owners, and dealers will install Field Service Kit Z1604 which includes replacement rotation bearing bolts, washers, pedestal reinforcement plates, and bolt spacers, free of charge. https://cybermaxtools.com/vehicle-recalls/terex/tl80/20V240000Wed, 29 Apr 2020 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2019-2020 TL80 and TL80/112 aerial devices. The installed slope indicator and decals incorrectly state that the chassis can be 5 degrees out of level for aerial device use. Fix: Terex will notify owners, and dealers will replace the incorrect slope indicator and decals, free of charge. The recall began May 12, 2020. Owners may contact Terex customer service at 1-605-882-4000.https://cybermaxtools.com/vehicle-recalls/terex/digger-derrick/20V200000Tue, 07 Apr 2020 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2018-2019 C4045, C4047, C5050, and C7066 Digger Derrick vehicles. Due to an engine computer program error, if the hood switch fails or opens, the remote engine start/stop function becomes disabled. Fix: Terex will notify owners, and dealers will reprogram the engine computer program, free of charge. The recall began April 16, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's https://cybermaxtools.com/vehicle-recalls/terex/tcx/20V168000Fri, 20 Mar 2020 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2009-2016 TCX60/85 and SML65/90 aerial devices. The rod eyes on the 25ft lift cylinders may fail prematurely. Fix: Terex will notify owners, and dealers will replace the rod eyes and shims, free of charge. The recall began April 9, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's number fhttps://cybermaxtools.com/vehicle-recalls/terex/tm-series/20V103000Mon, 24 Feb 2020 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2014-2019 TM bucket/boom trucks. The limit switch was installed upside down and does not stop platform level movement if the platform level exceeds 15 degrees. Fix: Terex will notify owners, and dealers will properly install the limit switch, free of charge. The recall began April 14, 2020. Owners may contact Terex customer service at 1-605-882-4000. Terex's numbhttps://cybermaxtools.com/vehicle-recalls/terex/digger-derrick/18V794000Fri, 09 Nov 2018 00:00:00 +0000Terex South Dakota, Inc. (Terex) is recalling certain 2017-2018 Terex Digger Derrick vehicles. The guide bar that attaches the pole guide arms to the pole guide tilt bracket may have insufficient welds, possibly resulting in the guide arm falling while in use. Fix: Terex will notify owners, and dealers will replace the affected guide bars, free of charge. The recall is expected to begin December 14, 2018. Owners may contact Terex at 1-605-882-4000. Terex's recalhttps://cybermaxtools.com/vehicle-recalls/terex/c4000/18V520000Tue, 07 Aug 2018 00:00:00 +0000Terex south Dakota, Inc. (Terex) is recalling certain 2015-2018 Terex C4000, C5000, C6000, and General digger derricks. The welds between the coupler and hex shaft may be undersized, causing them to fail and the auger to fall unexpectedly. Fix: Terex will notify owners, and dealers will either repair the weld or replace the affected component, free of charge. The recall began October 3, 2018. Owners may contact Terex customer service at 1-60https://cybermaxtools.com/vehicle-recalls/terex/aerial-devices/17V321000Mon, 15 May 2017 00:00:00 +0000Terex South Dakota (TSD) is recalling certain 2012-2017 Digger Derricks and Aerial Devices, models C4000, C5000, C6000, C7000, General, HR, OM, RM,RMX, SC, SCM, TC, TCX, TL, TM, and XT, built on Freightliner chassis with SmartPlex engine controls. The vehicles have a switch to monitor whether the hood is open or not. If the switch thinks that the hood is open, the vehicle software may disable the Fix: TSD will notify owners, and dealers will reprogram the vehicles to only disable the engine start function if the switch indicates that the hood is open, free of charge. The recall began on June 28, 20https://cybermaxtools.com/vehicle-recalls/terex/aerial-devices/17V320000Mon, 15 May 2017 00:00:00 +0000Terex South Dakota (TSD) is recalling certain 2007-2016 vehicles equipped with Terex C4000, FC, HR, HRX, SCM, TC, TCX, TL, TPL, and XT aerial devices and digger derricks used for utility line work. In the event of a short circuit of a tool plugged into the onboard electrical socket, the GFPE breaker may not trip at the proper current before the user receives a shock. Fix: TSD will notify owners, and dealers will replace the breakers with GFCI breakers that will trip at a lower current, free of charge. The recall began on June 27, 2017. Owners may contact TSD Customer Shttps://cybermaxtools.com/vehicle-recalls/terex/tc/16V805000Fri, 04 Nov 2016 00:00:00 +0000Terex South Dakota (TSD) is recalling certain model year 2009-2014 Terex TC, and TCX hybrid electric trucks manufactured June 8, 2009, to July 30, 2014 and equipped with aerial devices. The affected vehicles may be improperly wired, and as a result, the aerial boom may move unintentionally when the hydraulic tools are being used. Fix: TSD will notify owners, and dealers will install a diode and alter the wiring to correct the issue, free of charge. The recall began on November 20, 2016. Owners may contact TSD customer service at 1-https://cybermaxtools.com/vehicle-recalls/terex/hr/16V477000Tue, 28 Jun 2016 00:00:00 +0000Terex South Dakota (TSD) is recalling certain model year 2015-2016 HR, HRX, TC, and TCX Aerial devices manufactured May 4, 2015, to June 15, 2016. The platform leveling cylinder on the affected vehicles may have poor welds, and as a result, platform leveling cylinder may fail at the elbow, allowing the platform to tilt. Fix: TSD will notify owners, and dealers will replace the hydraulic cylinders, free of charge. The recall began on August 22, 2016. Owners may contact TSD Customer Service Department at 1-800-982-8975. TSDhttps://cybermaxtools.com/vehicle-recalls/terex/hr/16V435000Tue, 14 Jun 2016 00:00:00 +0000Terex South Dakota, Inc. (TSD) is recalling certain model year 2016 HR, HRX, LT, LTM, TL, TC, and TCX aerial devices manufactured January 1, 2016, to May 12, 2016. These aerial devices have a hydraulic motor whose shaft may fail resulting in unexpected boom rotation or winch movement. Fix: TSD will notify owners, and instruct owners to inspect the hydraulic motor. Motors within a certain serial number range will be replaced, free of charge. The recall began on August 3, 2016. Owners may